Big Power Air Humidifier for Swallow Home HL-5500

• Customization: Available
• Aromatherapy: Yes
• Style: Portable
• Model NO.: HL-5500
• Type: Ultrasonic
• Usage: Home, Industry
• Certification: CE, RoHS
• Humidity Control: Manual
• Humidification Method: Mist Discharge
• Power Type: AC Source
• Timing Function: With Timing Function
• Water Shortage Power-off Protection: With Water Shortage Power-off Protection
• Height: 41cm
• Net.W: 7.6kgs
• Diameter of Water Container: 32 Cm
• Humidifying Rate: 3.0-3.5L/1 Hour
• Voltage/Frequency: 220V, 50Hz
• Revolution: 2700-3000 Rpm
• HP: 1/6 HP
• Transport Package: Export Carton in Stadard
• Specification: 5.3L
• Trademark: OEM ODM
• Origin: China
• HS Code: 8479892000
• Production Capacity: 50000/Month

Product Description

Product advantage
The surface treatment of internal parts of humidifier is made, which be great helpful for acid and alkali-resistance. After long time running, it will be not any corrosion and rust, and the motor work stable at super performance. This humidifier has many features such as good performance of fog spraying, rapid humidifying, compact, low noise, energy saving and easy assembly etc. It can be widely used in the fields of textile, tobacco, printing, medicine and micro-electronics.

Application features
1. Economical and practical, beautiful and compact, easy operation.
2. It is equipped with easy access grip for easy and quick movement.
3. If the humidifier work with humidity control sensor, the humifying result will be better.
4. Humidity and temperature range: 0-95RH, 2ºC-40ºC.
5. Clean water, softened water or deionized water used for humidifier.
6. Fog spraying particle size, 5-10 microns. The ultra-fine mist covers about 33 square meters.
7. Lower down environment temperature as high as 6ºC-8ºC
8. The humidifier is equipped with a fan below, no fans on surface, it is much safer for user.
9. Two covers meet your special requirements. They could avoid the rubbish get into the machine body.


The requirement of water quality
This humidifier has not special requirement on water source, clean water is available for this unit.

How to assemble
1. Open the package and take humidifier out of package. Remove the foam and put main frame of humidifier on water container.
2. Use one cover as you needed. Put it on head of the machine.
3. The basin was fasten by a U sharped plastic hook in the edge.If put press with force down for V sharped hook on the edge of body for humidifier,the V sharped hook will stuck in the slot. The plastic hook should be installed on each edge .Then fixed the main engine of humidifier. And ensure that main frame is fixed on water container completely.
4. Connect humidifier and the hose of inlet water, turn on the cock of water source, and check if the float can work normally.
5. Taking the cord of humidifier to plug in changeover receptacle or humidity sensor to put through electric power.
6. If this unit fixed on wall is required, please prepare for the fixture in advance.